Optimising drilling and foundations: How updated machines promise greater efficiency

Premium Content
Listen to this article

Technology is making drilling and foundation equipment more sustainable and easier to operate than ever before. Andy Brown drills down into the details.

Bauer equipment is working on the Grand Paris Express in France Bauer equipment is working on the Grand Paris Express in France (Photo: Bauer)

The demand placed on drilling and foundation equipment is both specific and similar compared to other construction equipment.

Specific, because of the task 鈥� drilling into the ground is far removed from earthmoving 鈥� but it is even more specific when you consider the many factors and variables that affect the work. For instance, a wide variance in ground types effects the ground stability and thus the work, and there鈥檚 always the chance of coming across unexpected geological anomalies like hard rock layers, voids, or even groundwater that can disrupt operations and also damage equipment.

The challenges this sector has in common with others in construction are dealing with different regulations, increased sustainability pressures, finding the skilled labour to operate the equipment and incorporating increased technological advances.

The sector is seeing growth as both the global demand for infrastructure and the need for modernisation of infrastructure expands 鈥� both require drilling and foundation equipment for tasks such as deep excavations, pile driving, foundation repairs and more.

Demand for new equipment

Another growth driver has been countries around the world recognising the need for drilling and foundations work to be carried out in a more sustainable and advanced way, pushing the take up of new equipment.

This view is supported by a report from Business Research Insights that estimates that the global drilling and foundation equipment market had a value of US$4.5 billion in 2023 and will reach US$7.5 billion by 2032.

A leading player in this segment is Swedish-based Epiroc, and the OEM has recently launched its updated PowerROC T35. Speaking to International Construction, Masanori Kogushi, senior product manager at Epiroc, said that the new model satisfies the increasing demand of customers for lower running costs, increased fuel efficiency, and ease of operation.

鈥淭here is up to 40% lower fuel consumption due to auto engine speed control by load sensing and a fuel economy mode [enabled] by selecting engine maximum speed for drilling. For easy and intuitive operation, two electric one-touch lever controls make rod changing and drilling much easier and quicker,鈥� he says.

鈥淎 12-inch touchscreen-and-button display for monitoring system presents operational status such as troubleshooting, maintenance requirements, rig inclination and drilling parameters. Better total cost of ownership is achieved through a lower maintenance cost, 50% reduced hydraulic oil volume and two times longer service interval.鈥�

Construction work on a tunnel Drilling and foundations equipment are playing a key role on the Grand Paris Express project (Photo: AdobeStock)

When it comes to sustainability he says, 鈥淵es, lower fuel consumption is requested, and part of the targets for our customers.鈥�

Tommi Lehtonen, Group CEO at Junttan, agrees that sustainability is ever-important. The CEO of the company, which has recently launched a new DR5 drilling rig 鈥� more on that later 鈥� says, 鈥淪ustainability is important to everybody. We have focused on optimal energy efficiency i.e. low fuel consumption and minimising material consumption. DR5 is 20 tons lighter than our previous similar model and most of the competition and therefore we save 20 tons of steel which has a big impact on CO2 emissions. The DR5 platform is also designed to support battery-electric powerline to enable locally CO2-free versions in the future.鈥�

Technology to the fore

Technology goes hand in hand with sustainability as it leads to increased efficiency, and the more efficient a project, the more sustainable it is. Technology giant Trimble recently announced the availability of a Trimble Ready factory option for new Mincon piling and drilling attachments.

This means Mincon Drill Mast Attachments for skid steers and excavators now have an option for the installation of the Trimble Groundworks Machine Control System, which can significantly reduce the cost and complexity of the installation for the contractor.

The self-contained attachment is designed so that it can be connected to the stick of a variety of excavators. Operators have the option of renting a machine near a project site and having the attachment shipped separately, which helps reduce the cost.

When it comes to efficiency savings, Jonathan White, product manager of Civil Construction Field Solutions, reveals, 鈥淥ur customers have reported up to 75% labour savings compared to traditional methods. Additionally, customers have experienced up to 95% post accuracy, and 2% less misalignment of hammered piles.鈥�

When it comes to technology, White adds that, 鈥淢arket acceptance is increasing and we expect that to continue as the return on investment is now well documented.鈥�

Another form of technology being used in this sector is how the equipment is powered. Liebherr鈥檚 new carrier machine for slurry wall construction, the LBX 600, is available in both conventional and battery-powered versions, the LBX 600 unplugged.

Both versions are said to have identical performance data, but the unplugged version has zero emissions and is extremely quiet.

Liebherr LBX 600 Liebherr LBX 600 (Photo: Liebherr)

The LBX 600 can be fitted with mechanical or hydraulic grabs. The modular boom system allows for three different versions of the machine and a high degree of flexibility. The standard version of the machine has a total height of 17.8m.

Grand projects

Drilling and foundation equipment are being used on projects big and small across the world, with one of the biggest projects being the Grand Paris Express in France. Part of this project is Line 15 of the Paris metro, which is 75km in length and currently under construction 鈥� when complete, it will serve 36 stations.

Up to 80m deep diaphragm walls are needed for the construction of the future metro stations, the ventilation system, emergency exits, and starting and finishing shafts for the tunnel boring machine. All this is happening in the middle of one of the most vibrant metropolises in Europe.

Since December 2024, the company Botte Fondations has been using a Bauer cutter system on the project that has never been seen before: the BCS 185 power pack. The basis is the Bauer Cutter System BCS 185, which has been specially optimised for cutting up to 90m below ground level. The twistable hose drum system allows the cutter to be twisted continuously within a range of -50 to +95 degrees to its normal position, enabling it to reach any corner in the excavation pit.

A diesel or electric generator can be used for operation. This allows the system to be optimally adapted to different project conditions. Using the electric generator significantly reduces the noise level, enabling work to be carried out even in noise-sensitive areas.

Another interesting product is Vermeer鈥檚 110kN D24 horizontal directional drill that is powered by a 100-hp (74.6-kW) Cat 3.6L Tier 4F/Stage V engine. This size drill is one of the most popular machines for installing fibre worldwide and is designed to meet the needs of contractors working in countries that require Tier 4F/Stage V engines.

Ditch Witch JT21 The JT21 is an upgraded replacement for the JT20 (Photo: Ditch Witch)

According to Clint Recker, product manager for utility HDD equipment at Vermeer, the D24鈥檚 Automated Rod Exchange (ARE) system means that a single button push completes the entire rod changeout sequence and eliminates up to 19 manual steps, streamlining operations.

The machine features an onboard diagnostic system, accessible via the touchscreen display, providing information about any issues and step-by-step troubleshooting guidance. This brings capabilities previously only available for dealer technicians to operators in the field.

Recker says that this will save contractors time and money. 鈥淭he onboard diagnostic system is about efficient troubleshooting. Currently, if an issue arises with our S3 equipment, a dealer technician must visit the site with a laptop to plug in the service tool and diagnose the problem. With our next-generation platform, the diagnostic tool is integrated into the machine鈥檚 touchscreen,鈥� he comments.

When asked if sustainability is increasingly important to customers, Recker鈥檚 answer is unambiguous.

鈥淵es, many of our customers are focused on sustainability, which has always been a key consideration in our equipment development. What constitutes sustainability varies by region, often influenced by local laws and regulations,鈥� he says.

鈥淥ur team works to make our equipment meet these requirements, from engine emissions to operating sound levels. We also manufacture specialised HDD fluid reclaiming systems to reduce the amount of freshwater needed for drilling fluid on HDD projects.鈥�

Small part, big impact

Compressors are crucial when it comes to drilling 鈥� depending on the depth, soil, and other conditions, different power is required and thus different air requirements.

Atlas Copco says that its new X-Air+ 1200-40 mobile compressor sets new standards in deep drilling applications, by finishing the job at least 10% quicker and by being more fuel efficient.

The X-Air+ 1200-40 surpasses Atlas Copco鈥檚 previous flagship drilling compressor, the Y35. According to the company, the model has 15% more pressure and a 20% increase in drilling speed compared to the Y35. It features a new high-pressure element 鈥� to withstand even the toughest of operational conditions 鈥� and is protected by patented software.

As mentioned earlier, Junttan has launched the new Evolution series, starting with the DR5 drilling rig. This new series is said to represent the most significant investment in Junttan鈥檚 history.

The DR5 drilling rig has technology designed for both FDP (Full Displacement Piling) and CFA (Continuous Flight Auger) applications.

鈥淭he Evolution series has been designed with a strong focus on customer needs, ensuring that its advanced technology and innovative features directly address the challenges our clients face,鈥� said Tommi Lehtonen, Group CEO at Junttan.

Cat machine working with Trimble solutions Trimble has teamed up with Mincon (Photo: Trimble)

Technology is increasingly being integrated into this equipment segment. Trimble鈥檚 White says that its Groundworks Machine Control System which works with Mincon piling and drilling attachments are being used frequently in solar farm construction, although he makes the point that, 鈥渋ncreased efficiencies are experienced across drilling projects as well.鈥�

Epiroc鈥檚 Kogushi expands on this idea of technology leading to increased efficiencies, saying that, with an assisted control feature, 鈥淭his is an enabler for all to become a skilled operator.鈥� Technology to help upskill operators will lead to this sector digging deeper still for increased productivity.

必赢体育

STAY CONNECTED

Receive the information you need when you need it through our world-leading magazines, newsletters and daily briefings.

CONNECT WITH THE TEAM
Andy Brown Editor, Editorial, UK - Wadhurst Tel: +44 (0) 1892 786224 E-mail: [email protected]
Neil Gerrard Senior Editor, Editorial, UK - Wadhurst Tel: +44 (0) 7355 092 771 E-mail: [email protected]
Catrin Jones Editor, Editorial, UK 鈥� Wadhurst Tel: +44 (0) 791 2298 133 E-mail: [email protected]
Eleanor Shefford Brand Manager Tel: +44 (0) 1892 786 236 E-mail: [email protected]