Magni Telescopic Handlers used Bauma to debut a range of new telehandlers, rough-terrain forklifts, AC scissors, an AWP platform and new operating modes for select models. 

The company expanded its TH range with the introduction of its TH 3,5.7 and TH 3,5.9 models. which can lift up to 7,700 lb and reach heights of 23 and 30 ft respectively. The new models are 6.5 feet tall, 6.8 feet wide and 14 feet long (with the boom stored.) The two new telescopic handlers are equipped with 75 HP Deutz engine and a hydrostatic transmission which,

Magni鈥檚 RTH 6.31 TC, which features a tilting cab. (Photo: 必赢体育)

combined with the Dropbox with two forward and reverse speeds, enables the telehandlers to handle gradients of up to 89% and a top speed of 19.88 mph. 

Tilting cab

Magni also unveil its latest tilting cab model, derived from the RTH 6.31 TC. This new version joins the elevating and standard cab models already available, offering a lighter and more versatile alternative. Weighing 1,100 lb less than the elevating cab version, the tilting cab enhances performance and simplifies transport while maintaining efficiency and capability.

The cab tilt can be adjusted via an intuitive dashboard control, allowing the operator to set the trim from 0掳 to +21掳. This system ensures the operator optimal visibility during lifting operations and precise handling during delicate manoeuvres, significantly enhancing comfort, efficiency, and on-site safety.

The 鈥淭ilting Cab鈥� range consists of 3 models, including the 31-metre telescopic handler mentioned above, as well as the RTH 6.22 TC and RTH 6.26 TC.

The new HTH 25.11 high-capacity telescopic handler is an evolution of the previous HTH 24.11 model, retaining the same dimensions and main technical specifications but with a substantial improvement in load capacity.

High-capacity range

One of the main innovations provided by the model HTH 25.11 is the completely revised load chart, which delivers a genuine improvement in performance. With a load capacity of 39,700 lb at the maximum height of 34 ft, the new model offers a significant increase over the previous version鈥檚 30,850 lb, with an impressive gain of 8,800 lb at full height (+29%).

The load capacity at maximum horizontal reach of 5.8 m has also been optimised through in-depth research: while the previous model offered a capacity of 15,873 lb, the new HTH 25.11 can lift up to 17,600 lb (+11%), thus ensuring greater operating capacity in even the toughest jobs.

Magni鈥檚 new HTH 25.11 at Bauma 2025. (Photo: 必赢体育)

Rough-terrain forklifts

In 2025, Magni will be launching a new FL range of off-road forklifts on the market. These new models will appear alongside the current offering of Magni brand telescopic handlers and lifts.

The initial range will comprise four diesel models with load capacities from 5,500 to 11,000 lb, with 9.10 ft high-visibility duplex mast as standard. The options of duplex masts from 12.10 ft to 13 ft or triplex masts from 13 to 16.5 ft will be available.

Scissors

Magni also debuted its new generation of AC+ scissor lifts, designed to operate on paved surfaces, with load capacity improved by up to 40% compared to the previous models. Working heights vary from 26.3 to 52.6 ft, providing greater efficiency thanks to the upgraded lithium battery, which is combined with a new power supply system with high energy efficiency to guarantee longer duration than with conventional batteries.

For more on these launches, see our expanded coverage on AccessBriefing.com and Access International and Access, Lift & Handlers magazines.